H[5]: specified frequency output
L: output is high impedance
NC
No Connect
H or L or Open: No effect on output frequency or other device functions
2
NC
NA
No Connect; Leave it floating or connect to GND for better heat dissipation
3
GND
Power
VDD Power Supply Ground
4
OUT+
Output
Oscillator output
5
OUT-
Output
Complementary oscillator output
6
VDD
Power
Power supply voltage[6]
Notes:
5.In OE mode, a pull-up resistor of 10 kΩ or less is recommended if pin 1 is not externally driven.
6.A capacitor of value 0.1 μF or higher between VDD and GND is required. An additional 10 μF capacitor between VDD and GND is required for thebest phase jitter performance.
400-888-2483
我的账户
厂商技术支持
购物车
加入收藏
0
MEMS硅晶振产品
